Tutorial: Setting Up

From Lorekeeper Wiki
Revision as of 09:30, 15 August 2021 by Mercury (talk | contribs)
Jump to navigation Jump to search

Visual Guides

Some Lorekeeper users have written extensive guides on setting up:

It's recommended to use either of these guides as they're highly detailed and contain more screenshots!

What is the difference?

These guides pertain to setting up on different webhosts. The outcome is the same, but cost of webhosting and involvement in setting up varies - please read through the guides and choose the type of webhosting that fits your needs/budget/time!

The information below is the same as detailed in Juni's guide, but more general/doesn't contain info about setting up on a shared server/configuring passwordless login.

Setting up Locally

There is also a community tutorial on setting up Lorekeeper locally:

This has superseded the information in this guide relating to local set-up in the interest of clarity. Having a local/testing environment is a prerequisite for most support.

However, it's also an option if you want to try out or experiment with Lorekeeper, e.g. before committing to hosting!

Requirements

Requirements for a web host (assuming it's running on some variant of Unix):

  • PHP 7.4
    • Note that you need PHP 7.4 specifically; later versions have no guarantee of working.
  • MySQL (or equivalent)
  • SSH access

If you're not familiar with any of these and don't want to spend too much time shopping around hosts, I personally recommend going with DreamHost's VPS (the cheapest plan will do) as they have everything necessary (the demo site is hosted by them) and their own written instructions for some of the steps in the setup, which I have linked below.

Additional software requirements:

  • PuTTY (if using Windows) / a program that can be used to SSH into your server
  • A Git client (e.g. Sourcetree, recommended if you are new to git, or preferred client if you already have one)
    • You must use git, no exceptions. This is required to be able to obtain updates, etc.
  • A text editor (Visual Studio Code is recommended)
  • A command line program (for your computer - on windows, this is Command Prompt)

Preface

Setting up your own copy of Lorekeeper consists of 3 main steps:

  1. Uploading a copy to your web host
  2. Setting up the database/admin account configuration
  3. Site configuration/adding your ARPG data/modifying the source code

If you have a personal favourite method of setting up your workflow, I would strongly recommend going with what you're comfortable with! Jump ahead to step 2 as there are a few commands you have to run from the command line.

Otherwise, for this tutorial, I'll assume that you have never touched Git and worked on the command line before, and will run through the steps I go through to get this up and working, with my usual workflow. Refer to the basic version of the tutorial to get it uploaded with less fuss, but less convenience working with the source code.

Uploading

We're going to set this up so that we can use Git to manage changes to the site. The setup is based on this article (with a few modifications + expanding on the comments).

Obtaining Local and Server Copies

First, we want to make sure we have the software we need. For Windows PCs, download PuTTY from here and install/set it up (click here for instructions).

Next, we need hosting and a domain name. I'll be using Dreamhost in the examples of this tutorial for hosting.

Set up the domain name so it points to your server. How to do this depends on where your domain name is registered, so check the instructions they should have provided.

Obtain a copy of Lorekeeper. The recommended way to do this is to git clone it on your computer - there are various ways of doing this, but the simplest way is probably to clone it from your Git client. This will also initialise it as a Git repository on your computer. Now, you have a copy of Lorekeeper on your computer that you can use for working. I'll call this your local copy, and the one on your server the server copy (or live site).

We're going to get the code onto the server. Using your SSH client (PuTTY on Windows/Terminal on Mac) SSH into your server - here are Dreamhost's very detailed instructions on how to do that.

From here on, you can enter the commands almost exactly as they are.

Navigate to the directory we're putting the files in.

cd ~

Make a directory for your site - name it whatever you want. In this example I'll use "site-name.com", so replace that with your site name.

mkdir site-name.com
 cd site-name.com

Make a directory called

www

, go in and git init it.

mkdir www
 cd www
 git init

Go back out and make a second directory named

site_hub.git

and init it as a bare repository.

cd ..
 mkdir site_hub.git
 cd site_hub.git
 git --bare init

Go to your Git client (e.g. Sourcetree as suggested above), select your folder containing Lorekeeper's code and add site_hub.git as a remote. The address is similar to your SSH address but points directly to the folder, something like

ssh://username@host.com/~/site-name.com/site_hub.git

.

If successful, push the code to the remote. In Sourcetree, right click on the remote, choose to push, select the master branch and click OK.

Back in the SSH client, we'll add site_hub.git as a remote for www.

cd ../www
 git remote add hub ../site_hub.git

At this point if you enter

git remote show hub

, you should see something like

* remote hub
   URL: /home/your_username/site-name.com/site_hub.git

Run a git pull.

git pull hub master

Wait for it to finish running, and if it looks like nothing went wrong, enter

ls

and see that there are files inside the directory.

Git Hooks

If everything looks good, we'll set up git hooks so that updating the site is as easy as pushing a button.

Continue by entering

cd .git/hooks
 nano post-commit

This will bring up a blank text editor. Enter the following text:

#!/bin/sh
 
 echo
 echo "**** Pushing changes to Hub [Prime's post-commit hook]"
 echo
 
 git push hub


To save the file, enter in order: Ctrl + X, y, enter.

Then, we'll change the permissions on the file:

chmod +x post-commit

We'll also add a hook in site_hub.git.

cd ../../../site_hub.git/hooks
 nano post-update

The contents of this file (note the directory name you have to edit below!!):

#!/bin/sh
 
 echo
 echo "**** Pulling changes into Prime [Hub's post-update hook]"
 echo
 
 cd $HOME/site-name.com/www || exit
 unset GIT_DIR
 git pull hub master
 
 exec git-update-server-info


Once again: Ctrl + X, y, enter.

And again, we'll change the permissions on the file:

chmod +x post-update

You can now test the hooks by modifying something harmless on your local copy (such as a comment) and commit/pushing the change to the server.

If set up correctly, the output log should display the message you wrote in post-update and show that the file was updated without errors.

For a small but important tweak, we'll change the origin of our repository to point to the new site. This is demonstrated in Sourcetree, but should not be too much different in other clients.

  1. Checkout the site's master branch.
  2. Rename the old origin branch.
  3. Change the site's master branch to origin.

In the future, you (and other users who have access to the repository) can simply push new changes to the code through your Git client at the click of a button, which also keeps track of files that you've added and/or modified, and contains a log of who made what changes to the code. Hooray!

Setting Up

Web Directory

Update your domain to point to the www/public folder.

For DreamHost users, this is under Manage Domains > Edit > Web directory. The page may take a few hours to update, and display an error if you have not completely finished the setup yet (this is normal).

Install Composer

Packages for the project are installed through Composer.

Instructions for installing Composer on your server are here.

I recommend following the global instructions. If you follow the local setup, place composer.phar in the www directory.

Additionally, if you're using DreamHost, you will want to change the default PHP version for convenience. See here for instructions.

Packages and Database Setup

In your SSH client, navigate to the www folder and run composer install. (Do this also on your own computer, but navigate to the appropriate directory instead)

cd ~/site-name.com/www
 composer install

Let it finish running. After that, we'll set up the database.

If you're not on DreamHost:

This is easiest through phpMyAdmin, so navigate to your site's phpMyAdmin in your browser.

Click on "Databases" in the top bar, and add a database - it can be called anything you like.

If you're on DreamHost, go to the control panel to set up a database. Be sure to choose names and a password that cannot be easily guessed and note them down! You will need the database name, database user (the New Username field) and database user password (the New Password field) later. The hostname can be used to access PHPMyAdmin - note this down as well.

API Keys

Now, we need to get access to services that will allow us to send e-mails (for registration/resetting passwords) and connect to various social media, etc. platforms (for verifying accounts).

For a small site with little traffic, I'd suggest SendGrid (100 mails a day on their free plan), though you can use any service that you like.

SendGrid Setup

If you're using Sendgrid, after you've created your account, go to API Keys under Settings in the Control Panel and create a new key. Note down the generated SendGrid API key as we'll need it later. Keep this a secret!

Note that you will need to verify your domain. See here for more information.

Social Media Platforms

As of 2.0.0, there are several options for platforms to use for account linking/verification. See Category:Social Media Authentication for instructions for supported sites. Note that you will also need to enable these via config file later.

.env

Now, let's use that information.

The site requires a file named .env to be placed in the root directory of your site (in the www directory). We'll do this in both the local copy and the server copy, but with a few differences.

Create a file both locally and on the server that contains the following, filling out the fields as noted (avoid using spaces in names):

APP_NAME=site_name_with_no_spaces
 APP_ENV=
 APP_KEY=
 APP_DEBUG=
 APP_URL=
 
 CONTACT_ADDRESS=your_contact_address@site-name.com
 DEVIANTART_ACCOUNT=your-dA-group-account-username
 
 LOG_CHANNEL=stack
 
 DB_CONNECTION=mysql
 DB_HOST=
 DB_PORT=
 DB_DATABASE=
 DB_USERNAME=
 DB_PASSWORD=
 
 BROADCAST_DRIVER=log
 CACHE_DRIVER=file
 QUEUE_CONNECTION=sync
 SESSION_DRIVER=file
 SESSION_LIFETIME=120
 
 REDIS_HOST=127.0.0.1
 REDIS_PASSWORD=null
 REDIS_PORT=6379
 
 MAIL_DRIVER=smtp
 MAIL_HOST=smtp.sendgrid.net
 MAIL_PORT=587
 MAIL_USERNAME=apikey
 MAIL_PASSWORD=your_sendgrid_api_key
 MAIL_FROM_ADDRESS=noreply@site-name.com
 MAIL_FROM_NAME=mail_sender_name
 
 AWS_ACCESS_KEY_ID=
 AWS_SECRET_ACCESS_KEY=
 AWS_DEFAULT_REGION=us-east-1
 AWS_BUCKET=
 
 PUSHER_APP_ID=
 PUSHER_APP_KEY=
 PUSHER_APP_SECRET=
 PUSHER_APP_CLUSTER=mt1
 
 MIX_PUSHER_APP_KEY="${PUSHER_APP_KEY}"
 MIX_PUSHER_APP_CLUSTER="${PUSHER_APP_CLUSTER}"
 
 DEVIANTART_CLIENT_ID=your_deviantart_client_id
 DEVIANTART_CLIENT_SECRET=your_deviantart_secret
 DEVIANTART_CALLBACK_URL=/


Leave the APP_KEY blank, as it will be generated in a later step.

Comparison of local (left) and server (right) .env.

On the local version, find and fill out the following lines as such (if you created an extra app for testing on deviantART, change the dA client ID and secret to that):

APP_ENV=local
 APP_DEBUG=true
 APP_URL=http://localhost
 
 DB_HOST=127.0.0.1
 DB_PORT=3306
 DB_DATABASE=your_local_database_name
 DB_USERNAME=root
 DB_PASSWORD=


(Note that in the image to the right, Mailtrap.io is being used for local emails and the CONTACT_ADDRESS and DEVIANTART_ACCOUNT options are missing, but should be required.)

On the server version, find and fill out the following lines as such:

APP_ENV=production
 APP_DEBUG=false
 APP_URL=http://site-name.com
 
 DB_HOST=your_database_hostname
 DB_PORT=3306
 DB_DATABASE=your_server_database_name
 DB_USERNAME=your_server_database_user_name
 DB_PASSWORD=your_server_database_user_password

Command Line Setup

Moving on to command line setup - now that we have the files in place, we're going to create the database tables, insert some basic required data, and get the crons (scheduled scripts; primarily for scheduled news posts) working.

On both local and on the server, run the following, letting each complete before the next one:

php artisan key:generate 
 php artisan migrate


This will generate the app key (used for encryption) and create the database tables.

Run the following commands afterwards:

php artisan add-site-settings
 php artisan add-text-pages
 php artisan copy-default-images

Then, we'll set up the admin user:

php artisan setup-admin-user


This will prompt you for the creation of the admin account, which will have access to all site data. On the live site, I would recommend using this as a purely administrative account and not the site owner's personal account. You can run this command again to change the email address and password of the account.

At this point, you should be able to log into the site with the admin account.

Cron Jobs

Finally, we'll set up the crons so we can make use of scheduling.

For non-DreamHost users:

Refer to this article for how to edit the crontab file.

Add the following line, editing the directory name as necessary:

* * * * * cd ~/site-name.com/www && php artisan schedule:run >> /dev/null 2>&1

If you are using DreamHost:

Go to the control panel, click on More > Cron Jobs > Add New Cron Job.

Select the shell user, enter a title (not important; you can set this to your site name for easy identification), and under command to run, add:

cd ~/site-name.com/www && php artisan schedule:run >> /dev/null 2>&1


Then choose the following options:

When to run: Custom

Minutes: Selected Minutes

In the combo box, choose every multiple of 5. DreamHost restricts cron jobs to run every 5 minutes at the very least, so unfortunately you can't get to-the-minute accuracy.

If you can view the site from the URL - congratulations, you've set up the site successfully!

Site Configuration

Before we start adding data, let's edit the config files in the code, making use of Git to send your updates to the server.

Config Files

In your local copy, open up config/app.php in your text editor of choice. The code is commented in detail, so you can read and modify the config as you need. Most settings do not need to be touched since you wrote them in .env, but you may want to edit the timezone to match the clock your community goes by.

Open up config/lorekeeper/settings.php. Similar to the above, you can read the comments and modify the config as required.

In your Git client, choose the modified files, commit and push them (important: to your server, not Github!) with a helpful message. If the hooks have been set up correctly, you should see the effects on the live site after it's done. If not, and there were no errors, you may need to run

php artisan config:clear

on the server.

Site Data

Now we can start editing the site data. All changes on the live site will only stay on the live site, and all local changes will only remain local.

Log in as the admin user and go to the admin panel (click the crown in the navigation bar). The first things you may want to edit are:

  • Site Settings
  • User Ranks (create moderator ranks)
  • Pages (Terms of Service, Privacy Policy, About)
  • Site Images

You can, of course, dive right into editing the game data - I would recommend editing in the order:

  • rarities
  • categories (trait categories, item categories, prompt categories, character categories)
  • species, traits, items, currencies
  • loot tables
  • prompts, shops

Note that at least 1 character category is required to create any characters. More specific information about each type of data can be found on the respective wiki pages.

Troubleshooting

Composer install error: The filter extension is missing.

You are probably using PHP 7.4 on the command line, change it to 7.2 or 7.3.

PHP Fatal error: Uncaught Error: Call to undefined function JsonSchema\Uri\filter_var() in …

Same as above, change to PHP 7.2 or 7.3.

500 Server Error trying to send emails

For people who registered accounts after April 6 2020, SendGrid requires the sender identity to be verified. See this article for details.